How to Remove a Printer from Offline Status?

Getting your printer back online when it shows an offline status can be frustrating. This comprehensive guide covers all the common issues that cause printers to appear offline and provides step-by-step instructions to get your printer back up and running.

How to Remove a Printer from Offline Status?

What Does “Printer Offline” Status Mean?

When your printer shows an “offline” status, it means that your computer and the printer are no longer able to communicate properly over the network or USB connection.

There are a few common reasons why a printer may show offline when you try to print:

  • The printer has been manually set to offline mode
  • The network or USB cable is disconnected
  • Driver issues like corruption or missing drivers
  • Configuration problems like incorrect port setup
  • The printer hardware itself has failed or lost power

The good news is that in most cases, this offline error can fixed with some simple troubleshooting techniques. This guide will walk you through the most common issues and solutions.

Network vs. Local Printers

It’s important to first identify whether your printer is networked over WiFi/Ethernet or directly connected to your computer via USB cable.

  • Networked printers rely on proper communication over your router and cabling, so the issue may lie in your networking setup.
  • Local/USB printers depend solely on the direct computer connection, so issues are isolated to that specific PC and USB port.

The troubleshooting steps to get these printers back online can be quite different. This guide covers fixes for both.

#1: Check Printer Power and Connections

The very first thing to check with any offline printer is the basic physical connections – both power and data cables.

  • Verify the printer itself has power – check indicator lights, display, etc. Power cycle the printer to reboot it.
  • For networked printers, check Ethernet cables or WiFi signal. Try disconnecting/reconnecting cables or rebooting router.
  • For USB printers, switch out USB ports and cables to test connectivity.

Many offline errors are simply caused by a loose network connection or USB port issue. Check these first before proceeding to additional troubleshooting steps below.

Step-by-Step Instructions

Follow these instructions to verify basic connectivity issues are not causing the offline status:

  1. Check power: Is the printer turned on and showing indicator lights/display? If not, check the power cables and connections.
  2. Power cycle: Power cycle the printer by turning it off, waiting 30 seconds, and powering back on.
  3. For networked printers:
    1. Check network cables – Ensure Ethernet cable is securely plugged in at both ends.
    2. Check WiFi connectivity – If on wireless, log into router admin to verify WiFi signal strength. Move printer closer if poor signal.
    3. Reboot router – Power cycle router/access points to refresh network connections.
  4. For USB printers:
    1. Check USB connections – Disconnect/reconnect USB cable, swap to a different USB port.
    2. Try a different USB cable if available.

After checking these physical connections and power cycling components, try printing a test page. If issue persists, move on to additional troubleshooting.

#2: Update or Reinstall Printer Drivers

Printer drivers act as the critical software communication between your operating system and the printer itself. If they are outdated or corrupted, connectivity issues can occur manifesting as offline errors.

Updating to the latest printer drivers or reinstalling them fresh is one of the best ways to get your offline printer back up and running.

Step-by-Step Instructions

Follow these instructions to update your printer drivers:

  1. Identify printer model – Determine the exact model name/number for your printer. Check documentation if unsure.
  2. Visit manufacturer site – Go to the support website of your printer’s manufacturer (Canon, HP, Epson, etc).
  3. Find drivers page – Search for the downloads/drivers page and your printer model. Identify latest driver.
  4. Download drivers – Download driver install file and save to your computer. Make note of file location.
  5. Run installer – Close any open applications. Double-click saved install file and work through prompts.
  6. Restart computer – Once installed, restart computer for changes to take effect.

If issue persists or drivers will not install, you may need to uninstall then reinstall fresh using the manufacturer’s driver uninstall utility found in your printer properties. Follow same steps again post-uninstall.

#3: Check Printer Port Configuration

Print ports act as the interface for sending print jobs from your computer to printer – similar to cables physically connecting devices. If ports get incorrectly mapped or configured, offline status can occur.

Re-adding ports or even switching port types (TCP vs USB) can get printers successfully communicating again in Windows.

Step-by-Step Instructions

Follow these instructions to check and reconfigure printer ports:

  1. Open printers list – Go to Start > Settings > Printers & Scanners. Open your printer properties.
  2. Select ports tab – Click on the Ports tab to show configured ports. Note current port(s).
  3. Delete ports – Delete existing ports by highlighting and clicking Remove Port button.
  4. Add new port
    • For network printers, add a Standard TCP/IP port. Enter printer IP address.
    • For USB printers, add a USB port. Select from detected printers in dropdown.
  5. Apply changes – Click apply to save new ports, then try printing again.

Changing port configurations essentially recreates the communication interface between computer and printer. Even switching port type from USB to TCP/IP (or vice versa) may get printer back online.

#4: Reset Printer to Factory Defaults

If all else fails in getting an offline printer back online, resetting the printer itself to factory default settings often does the trick. This essentially clears any problematic misconfigurations and gets connectivity working again.

Resetting defaults varies across printer manufacturers and models – check user manual for specifics. Basic process is below:

Step-by-Step Process

Follow these general steps to reset your printer:

  1. Access printer settings menu – Via the front panel or browser access to IP address.
  2. Locate reset option – Consult manual if unsure. Usually in Admin Settings or Maintenance menus.
  3. Confirm reset – Printer will prompt to confirm factory reset. Data and settings will be deleted.
  4. Complete process – Printer will reboot itself and restore factory configs.
  5. Reinstall drivers – Download latest printer drivers after reset completes and reboot computer.

Keep in mind that resetting the device deletes any customized settings, presets, etc. Printer will need to be reconfigured back to operational state.

Key Takeaways and Recommendations

Getting stubborn offline printers back online usually takes using a combination troubleshooting steps covered in this guide:

  • Start with simplest fixes like checking power, cables, router reboots first before more complex solutions.
  • Update or reinstall drivers. An offline status is commonly caused by driver issues.
  • Reconfigure print ports if drivers don’t resolve. Deleting old ports and defining new correct ones resets connectivity.
  • Factory reset the printer itself if other steps don’t work. Clears configurations causing problems.

Work through these steps methodically to isolate root cause. Patience and a systematic approach is key to getting printers off that frustrating offline status. Don’t hesitate to contact printer manufacturer support if still struggling.


While an offline printer status can initially be alarming, the underlying causes of connectivity issues are usually quite resolvable with basic troubleshooting techniques.

In most cases, simply checking power and cables, updating drivers, reconfiguring ports, or factory resetting the device will get printers back online and usable again. Working through communication issue systematically is key rather than trying quick fixes randomly.

With the step-by-step guidance provided throughout this guide, you should now have the knowledge needed to get your offline printers back up and running. Just stay calm, methodical, and use patience when working through possible resolutions.

Frequently Asked Questions

Q: Why does my printer say offline when I know it has power and is connected?
A: The offline status specifically refers to the loss of communication between computer and printer, not just power. It could be connectivity through cables/WiFi or a software/driver issue stopping proper communication.

Q: Should I upgrade to the latest printer driver version to fix offline printer?
A: Yes, updating to the newest printer driver is recommended as the offline status is often caused by some kind of driver problem or incompatibility. Get latest from manufacturer.

Q: My printer lights are on but it still says offline. What should I check?
A: If printer power is ON but offline status remains, troubleshoot software issues on your computer. Update drivers, adjust port configurations in printer properties, or uninstall drivers completely then reinstall fresh.

Q: What type of port should I select for a WiFi printer showing offline?
A: For WiFi/network printers specifically, add a Standard TCP/IP port in printer properties. Make sure IP address configured matches printer IP on your network.

Q: Can I fix an offline local/USB printer by uninstalling and reinstalling drivers?
A: Yes – deleting printer drivers entirely making sure remnants are removed, then freshly downloading from manufacturer website and installing latest drivers can fix offline local/USB printers.

Q: My printer went offline after a Windows update. What should I do?
A: It’s quite common for printer connectivity issues to happen after major Windows updates. Follow same troubleshooting steps like driver updates, port adjustments, or do a full factory reset of printer itself.

Q: I tried everything but printer is still offline. Is my printer broken?
A: Not necessarily – printers showing persistently offline can definitely still be fixed in most cases. As a last resort, complete factory reset of the printer will wipe out any problematic misconfigurations causing connection issues.

Q: Are third-party ink cartridges the cause of my printer going offline?
A: Possibly – many printer manufacturers use proprietary cartridge chips that communicate ink levels. Third-party carts may confuse this signaling. Swap back to OEM cartridges to test.

Q: How can I prevent my wireless printer from going offline in the future?
A: For WiFi printers, position them within reliable signal range from routers/access points. Periodically update printer drivers to avoid software issues. Consider using Ethernet for most reliable connection.

Q: The printer itself has power but my computer says the USB printer is offline. Help!
A: Local USB printer showing offline usually indicates PC communication issue – not the printer hardware itself if powered on. Update USB drivers on computer, change USB port/cable, reinstall printer drivers.

Q: Should I delete and re-add printers showing offline status?
A: Removing offline printer fully from Devices list then adding it back fresh can rebuild connectivity assuming proper drivers reinstall. Configure correct port matching printer connection type.

Q: Can third-party software cause my printers to show offline?
A: Yes, other utilities that redirect or modify print jobs could cause conflict leading to false offline states. Try uninstalling any print management apps temporarily as a test.

Leave a Comment