How to Connect Epson L385 Printer to Wi-Fi ?

Connecting your Epson L385 printer to your Wi-Fi network allows for wireless printing from anywhere in your home or office network coverage area. A Wi-Fi connected printer makes printing more convenient as you can print from laptops, tablets, smartphones and more without requiring a physical USB or network cable connection.

How to Connect Epson L385 Printer to Wi-Fi ?

Setting Up and Connecting an Epson L385 Printer to Wi-Fi

Follow these steps to get your Epson L385 printer up and running on your Wi-Fi network.

What You’ll Need

  • Epson L385 Printer
  • Wi-Fi network name and password
  • Computer connected to Wi-Fi network
  • Printer driver software installed on computer

Instructions

  1. Set up the printer. Unpack and set up the printer hardware according to the instruction manual. Connect one end of the USB cable to your computer and the other end to the printer. Install ink cartridges. Load paper into the paper tray.
  2. Install software and drivers. Install the software and drivers from the installation disc that came with your printer. Alternatively, download and install drivers from Epson’s website.
  3. Connect printer to Wi-Fi.
    1. On your computer, open the printer software. Look for options to access the Wi-Fi or Wireless Setup. This may be under a Settings, Configuration or Network menu.
    2. Select Wi-Fi Setup Wizard or Wi-Fi Protected Setup Wizard. The setup wizard will scan for available Wi-Fi networks and prompt you to select your network name (SSID) from the list.
    3. Enter the password for your Wi-Fi network when prompted. Your printer should now connect to the network.
  4. Add printer on additional devices. To print wirelessly from smartphones, tablets or other devices, install the Epson printing app and connect to the printer on same Wi-Fi network.

You can now print wirelessly from multiple devices! Refer to your printer documentation for specific mobile printing instructions.

Troubleshooting Tips

If you are unable to connect your printer to Wi-Fi, try these troubleshooting steps:

  • Reboot the printer and the computer or device you are trying to print from.
  • Temporarily connect with a USB cable to redo the Wi-Fi setup.
  • Verify the Wi-Fi password entered is correct. Double check network names if you have more than one Wi-Fi network.
  • Check the Wi-Fi signal in the printer’s location and move the printer closer to the router if the signal is weak.
  • Disable firewalls and security software temporarily during setup.
  • Reset the printer’s network settings to factory defaults and run the Wi-Fi setup again from the start.
  • Contact Epson technical support for further assistance if connection issues persist.

Key Takeaways

  • Connecting your Epson L385 to Wi-Fi allows for convenient wireless printing from anywhere with network coverage in your home or office.
  • Setup requires both hardware setup of the printer itself and software installation to connect to the Wi-Fi network.
  • If unsuccessful connecting to Wi-Fi, try rebooting devices, check Wi-Fi signals, verify network info entered, disable firewalls, reset printer network settings or contact Epson support.

Conclusion

Following the setup instructions, installing Epson drivers and using the Wi-Fi setup wizard makes the process of getting your L385 hooked up to wireless printing smooth and straightforward. This brings the benefits of printing documents, photos and more wirelessly from many devices. If any issues pop up during the Epson Wi-Fi setup process, first attempt basic troubleshooting then reach out for assistance if problems continue. You will then be able to enjoy cable-free printing convenience.

Frequently Asked Questions

Q: How do I find my Wi-Fi network name and password?
A: On your Wi-Fi router, look for a sticker or label that has both your network name (SSID) and password (network key) printed on it. If you don’t have the sticker, check your router admin console for the Wi-Fi network info.

Q: My Epson printer won’t show my wireless network name during setup – what should I do?
A: If your network SSID isn’t displaying to select, try moving your printer closer to the router or access point. This could resolve a weak Wi-Fi signal causing networks not to show up.

Q: What is the default password for Epson L385?
A: The default administrator password for Epson L385 printers is “1234”. You should change this to a new unique password for better security.

Q: How do I reset my Epson printer Wi-Fi settings back to default?
A: Press and hold the Wi-Fi button on the printer for 5 to 6 seconds until the power and Wi-Fi lights start blinking, then release. This will reset the Wi-Fi connection data back to factory default.

Q: Why does my Epson printer go offline when connected to Wi-Fi?
A: If your printer goes offline intermittently on Wi-Fi, it is likely caused by a poor or unstable wireless connection. Try repositioning the printer closer to your router or access point for a stronger signal.

Q: My printer says connected to Wi-Fi but is not printing over the wireless connection – what should I try?
A: If your printer connects over Wi-Fi but jobs do not print wirelessly, try restarting both the printer and your wireless router. Also update your Wi-Fi drivers from Epson’s website and disable any firewalls/security temporarily to rule out software conflicts.

Q: Can I connect my smartphone or tablet directly to an Epson printer wirelessly without a router?
A: Yes, some Epson printers like the L385 support peer-to-peer Wi-Fi Direct and Wi-Fi Direct setup allows mobile devices to print directly to the printer without a wireless router network.

Q: Should I connect my L385 printer to my 2.4GHz or 5GHz Wi-Fi band?
A: Connect your Epson L385 to the 2.4GHz Wi-Fi band on your router or access point. The L385 does not support 5GHz Wi-Fi connections.

Q: How far can my Wi-Fi connected Epson printer be from the router?
A: Up to 300 feet, but optimal wireless performance is within 100 feet. Farthest functional distance depends largely on obstructions, interference and connection standards between the printer, router and client devices attempting to connect.

Q: My L385 printer Wi-Fi connection randomly drops, what should I check?
A: If your wireless connection is intermittently dropping, first ensure firmware for both the printer and router are up to date. Then check the Wi-Fi signal strength in the printer’s location. Reposition closer to the router if weak. The dropout issue could also be caused by wireless interference from other devices, so try changing the wireless channel.

Q: Can I connect the Epson L385 printer Ethernet and Wi-Fi at the same time?
A: No, the Epson L385 does not support simultaneously being connected over both Ethernet and Wi-Fi. It must be configured for only one active network connection method.

Q: What wireless standards are supported by Epson L385?
A: The Epson L385 is compatible with 802.11 b/g/n wireless standards and does not support the latest Wi-Fi 6 (802.11ax) connections. It can connect on both 2.4GHz and dual band networks.

Q: How can I find my Epson printer IP address when connected through Wi-Fi?
A: You can check the IP address assigned to your Epson printer over Wi-Fi by printing a network status sheet, checking on the LCD display panel if available, or finding it listed in your router’s DHCP client list.

Q: Why do my computers no longer detect the Wi-Fi connected printer?
A: If PCs that could previously detect the wireless printer now do not, try refreshing network connections or reboot devices. Also try resetting the printer’s network settings back to default then set up Wi-Fi again from scratch.

Q: How do I change my Epson printer’s administrator password?
A: Access your Epson printer configuration menu or software, look for device settings/administrator settings, then select the option to change, reset or set a new admin password. Save your new password for login access.

Q: How can I be sure my wireless network is securely encrypted?
A: Check your router settings and confirm the network security encryption type is set to WPA2 or WPA3 protocol, rather than having an open unsecured network. Update to WPA3 encryption if possible for maximum Wi-Fi security.

Q: Why might my mobile device not detect the Wi-Fi connected Epson printer?
A: If your smartphone or tablet doesn’t see the wireless printer, try manually adding the printer in the mobile app using the printer’s IP address instead of multicast discovery. Also ensure the device is on same network, no firewall issues exist and Wi-Fi access control allowlists are not blocking connections.

Q: Can I print a network configuration report from my Epson L385 printer?
A: Yes, press the paper feed and cancel buttons simultaneously to print a configuration status sheet. This prints helpful information like firmware version, total pages printed, serial number, network settings and more.

Leave a Comment